Dear All, I try to do my own compilation with H7 cam, and it works, ouhou ! I did it with a virtuallbox i had with ubuntu and qtcreator than i use for F7 cam. For debugging with openocd (0.10.0), gdb-server and baremetal, i downloaded a stm32h7x.cfg here : openocd-org/openocd/blob/master/…

I think you need to build openocd from source, or maybe try one of these builds: http://gnutoolchains.com/arm-eabi/openocd/ I never had to debug the H7 with openocd so far, so I can’t help. EDIT: Maybe this will help: [image] Bringing up an STM32H7 with openocd & Linux | Hackaday.io I…

Thanks, I will try this. What is your toolchain to debug H7 or F7 cam ? I would prefer to use the st toolchain, via stm32cubeMxProgrammer configurator and the Atollic True Studio IDE specially now where there is an AI cube package for cnn dedicated for CMSIS-NN. Unfortunately, i dont know how to …

I use stlink and gdb, but stlink doesn’t support H7 yet. [image] GitHub - stlink-org/stlink: Open source STM32 MCU programming toolset Open source STM32 MCU programming toolset. Contribute to stlink-org/stlink development by creating an account on GitHub.

I installed this : GitHub - openocd-org/openocd: Official OpenOCD Read-Only Mirror (no pull requests) and it works for debugging bootloader (i did an frimware programmation with openmv IDE) but i have reset for firmware at led_init( hardfault ), and mp_init during mp_lookuptable(…) if i comment l…

I just use printf() and OpenMV IDE. I’m basic.

I installed this : GitHub - openocd-org/openocd: Official OpenOCD Read-Only Mirror (no pull requests) and it works for debugging bootloader (i did an frimware programmation with openmv IDE) but i have reset for firmware at led_init( hardfault ), and mp_init during mp_lookuptable(…) if i comment…

Any news on this? Can it be done?

hello all, I started new installation with : OS : Ubuntu 18.04 Qt creator : 4.10.2 Default gcc (arm 32bit) Default openocd Plug in : Bare metal 4.1.2 debugger : GDB 8.3 which allows to debug openmv3 with stm32f7. For openmv4, i tried as well : openocd from ntfreak with stm32h7x.cfg without s…

Hi, the opensource debugging tools don’t work very well with H7 as far as I know, you’ll need to use the official ST debugging software.

What is the official ST debugging software ?

H7 compilation

OpenMV Boards

iabdalkader July 4, 2019, 12:35pm 4

I use stlink and gdb, but stlink doesn’t support H7 yet.

求助：关于使用openocd与cmsis-dap调试在led_init( hardfault )的问题

Topic		Replies	Views
Debugging OpenMV4 firmware OpenMV Boards	15	3432	May 30, 2021
Error Flashing Custom Firmware OpenMV Boards	5	5563	March 13, 2018
求助：关于使用openocd与cmsis-dap调试在led_init( hardfault )的问题 Chinese 中文	0	534	April 1, 2022
Programming OpenMV using STM32CubeIDE OpenMV Boards	1	540	October 8, 2022
H7 LOCKED, WHAT CAN I DO? OpenMV Boards	3	452	January 19, 2021

H7 compilation

Related topics