Hi, I’m using a GENX320 event camera sensor and a RT1062 board. I modified the firmware to fetch the event raw data by setting "OMV_GENX320_EHC_ENABLE " to be “0”. I want to get the (x,y,t) values for each event from the IDE, but I don’t know how to modify the code. Many thanks, Dec

Hi, the camera driver post-processes the event data in this case. It’s already going through x/y to create an image, but, the t is thrown away. Given a lot of folks have been asking about this… I’ll just add a feature in the firmware so you can use this mode. It’s really not a great mode. But, folk…

Thanks for the reply. I’m wondering if it is possible to only record (x,y,t) in a txt file or a raw format without showing the image in the IDE. Then, I can do post processing on my PC after recording or real-time image reconstruction using my PC’s CPU. I think if the threshold is setting properly,…

Hi, I’m going to get a meeting setup with Prophesee to see how to make this feature work. I’m the meantime, please use historgram mode and just set the frame rate. The integration time per pixel is then 1/framerate.

Many thanks. Hoping to see the code update.

I would also like to know how to get the event data (x, y, t, polarity) of the GENX320 event camera on openmv, and I am very much looking forward to OpenMV supporting the output of event data

I’m focused on an IDE release right now for this weekend. Prophesee has been alerted to the request and they are thinking of the best API. Once I get feedback I will try to work on this one upcoming weekend.

Hi, I’m wondering if there is any progress on this. Many thanks.

Hi, we’ve come to a spec agreement with Prophesee, I will start work on it later next month.

Hi @kwagyeman — appreciate the updates so far! Just checking: are you working on the GenX320 event-mode Python API right now, and if so is there an estimated timeline? In the meantime, could you share a minimal example showing how to pull raw event data (x, y, polarity) via the current Python inter…

GENX320 in event mode

OpenMV Boards

kwagyeman June 19, 2025, 4:34am 11

I’ll start work on it this weekend. I just have to finish another PR first before it. I expect to complete support for it in about 2 days.

Topic		Replies	Views
GenX320 raw event data on RT1062 OpenMV Boards	1	78	October 24, 2025
Inquiry About Fetching Event Data from GENX320 with OpenMV4-H7-Plus OpenMV Boards	7	188	May 29, 2025
GenX320: High-Rate Event logging on H7 Plus/RT1062 (SD blackouts and throughput limits) OpenMV Boards	4	129	December 11, 2025
GENX320 maximum streaming frequency OpenMV Boards	1	92	April 24, 2025
GENX320 Custom Histogram Construction OpenMV Boards	19	368	June 25, 2025

GENX320 in event mode

Related topics