God Bless you guys for the wonderful endeavor you are living up to.
Novice, please …
This is my code:
…
adc = pyb.ADC(pyb.Pin(‘P6’))
adcread=0
…
#while (True):
adcread=adc.read()
if (adcread>250):
clock.tick()
img = sensor.snapshot()
…
Do machine vision algorithms on the image here
…
print(clock.fps())
I need the Cam to consume as less power as possible until ‘adcread’ is greater than 250.
Once ‘adcread’ becomes greater than 250, the while loop should work and, thereafter, when ‘adcread’ falls below the value of 250, the Cam should go back to low power mode.
I understand that interrupts can be of use here. But how to raise an interrupt from ADC which continuously raises and falls?
Or, is there any completely different approach to this, please?