# OpenMV Cam2 white blinkining LED after firmware update

**URL:** <https://forums.openmv.io/t/openmv-cam2-white-blinkining-led-after-firmware-update/1214>\
**Category:** OpenMV Boards\
**Created:** [April 17, 2019, 11:26am UTC](https://forums.openmv.io/t/openmv-cam2-white-blinkining-led-after-firmware-update/1214 "2019-04-17T11:26:35Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![indefix123](https://avatars.discourse-cdn.com/v4/letter/i/90db22/32.png) [@indefix123](https://forums.openmv.io/u/indefix123)\
**Post date:** [April 17, 2019, 11:26am UTC](https://forums.openmv.io/t/openmv-cam2-white-blinkining-led-after-firmware-update/1214/1 "2019-04-17T11:26:35Z")

</div>

Hi I have tryed to use the OpenMV cam M4 with the OpenMV IDE and it asked me to update the firmware. After doing it I was not able to use it and there is always the white blinking LED. I tryed the update using also the OpenMV’s DFU bootloader with the jumper at the Boot and RST pins but again it did not work. Is there any other solution?

---

<div class="post-metadata">

**Author:** ![indefix123](https://avatars.discourse-cdn.com/v4/letter/i/90db22/32.png) [@indefix123](https://forums.openmv.io/u/indefix123)\
**Post date:** [April 17, 2019, 1:40pm UTC](https://forums.openmv.io/t/openmv-cam2-white-blinkining-led-after-firmware-update/1214/2 "2019-04-17T13:40:31Z")

</div>

Found a solution in [Bootloader Update - OpenMV Products - OpenMV Forums](http://forums.openmv.io/viewtopic.php?t=217) the firmware zip files contains the appropriate bootloader.

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [April 17, 2019, 2:53pm UTC](https://forums.openmv.io/t/openmv-cam2-white-blinkining-led-after-firmware-update/1214/3 "2019-04-17T14:53:51Z")

</div>

Great!
