# 为什么模板匹配运行不了在lcd上面 我是plus

**URL:** <https://forums.openmv.io/t/lcd-plus/11175>\
**Category:** Chinese 中文\
**Created:** [June 29, 2025, 1:51am UTC](https://forums.openmv.io/t/lcd-plus/11175 "2025-06-29T01:51:32Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![QIQI](https://avatars.discourse-cdn.com/v4/letter/q/e68b1a/32.png) [@QIQI](https://forums.openmv.io/u/QIQI)\
**Post date:** [June 29, 2025, 1:51am UTC](https://forums.openmv.io/t/lcd-plus/11175/1 "2025-06-29T01:51:32Z")

</div>

```auto
# 本作品采用MIT许可协议。
# 版权所有 (c) 2013-2023 OpenMV LLC。保留所有权利。
# https://github.com/openmv/openmv/blob/master/LICENSE
#
# 模板匹配示例 - 归一化互相关(NCC)
#
# 本示例展示了如何使用OpenMV相机的NCC功能将图像块与图像的特定部分进行匹配...
# 但请注意，除非在极其可控的环境中，否则NCC的实用性有限。
#
# 警告: NCC功能需要重新设计! 就目前而言，该功能需要大量改进才能实用。
# 本脚本仅用于展示此功能存在，但当前状态并不完善。

# 导入所需模块
import time # 用于帧率计算
import sensor # 用于相机控制
import image # 用于图像处理
import display
from image import SEARCH_EX # 导入 exhaustive 搜索模式

# 相机初始化
sensor.reset()

# 相机参数设置
sensor.set_contrast(1) # 设置对比度为1
sensor.set_gainceiling(16) # 设置增益上限为16
# 使用NCC进行模板匹配时，SEARCH_EX模式最大支持QQVGA分辨率
sensor.set_framesize(sensor.QQVGA)
# 可通过设置窗口区域来减少搜索范围
# sensor.set_windowing(((640-80)//2, (480-60)//2, 80, 60))
sensor.set_pixformat(sensor.GRAYSCALE) # 使用灰度图以提高匹配准确性

lcd = display.SPIDisplay()

# 加载模板图像
# 模板应为小尺寸灰度图像(如32x32像素)
template = image.Image("/2.pgm")

# 创建时钟对象用于FPS计算
clock = time.clock()

# 主循环：持续进行模板匹配
while True:
    clock.tick() # 更新时钟
    img = sensor.snapshot() # 捕获当前图像帧
    lcd.write(sensor.snapshot())
    # 调用find_template方法进行模板匹配
    # 参数说明:
    # template: 待搜索的模板图像
    # threshold: 匹配阈值(0-1)，值越高表示匹配越严格
    # step: 搜索步长，值越大搜索速度越快但精度可能降低
    # search: 搜索算法类型，可选SEARCH_EX(穷举搜索)或SEARCH_DS(菱形搜索)
    # roi: 可选参数，指定搜索区域(x, y, w, h)
    # 注意: 
    # 1. ROI必须小于图像且大于模板
    # 2. 使用SEARCH_DS时，step和ROI参数会被忽略
    r = img.find_template(
        template, 0.70, step=4, search=SEARCH_EX
    ) # 可通过取消注释添加ROI限制: , roi=(10, 0, 60, 60))
    
    # 如果找到匹配区域，则在图像上绘制矩形标记
    if r:
        img.draw_rectangle(r)
    
    # 打印当前帧率
    print(clock.fps())

```

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [June 30, 2025, 12:04am UTC](https://forums.openmv.io/t/lcd-plus/11175/2 "2025-06-30T00:04:47Z")

</div>

You are writing to the screen before finding the template. Find the template first and then call lcd.write().
