# Eagle Files for the OpenMV Cam H7 Plus

**URL:** <https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074>\
**Category:** OpenMV Boards\
**Created:** [December 11, 2020, 11:59pm UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074 "2020-12-11T23:59:08Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![coatquestion](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@coatquestion](https://forums.openmv.io/u/coatquestion)\
**Post date:** [December 11, 2020, 11:59pm UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/1 "2020-12-11T23:59:08Z")

</div>

Hi,

I couldn’t seem to find the .sch/.brd files for the latest version of this board. Looking at product page ([OpenMV Cam H7 Plus | OpenMV](https://openmv.io/collections/cams/products/openmv-cam-h7-plus)), it looks like only the 16-bit SDRAM version has its files posted. Can anyone point me to the proper files on this? I wanted to make sure I could see exactly what I was modifying should I choose to jumper anything.

Thank you!

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [December 12, 2020, 12:22am UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/2 "2020-12-12T00:22:51Z")

</div>

The 32-bit version doesn’t have public files. We didn’t really do the design ourselves. It was made by SignTown and they used Cadence Tools. The schematic PDF is all that we are posting.

---

<div class="post-metadata">

**Author:** ![darrask](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@darrask](https://forums.openmv.io/u/darrask)\
**Post date:** [December 8, 2021, 4:47am UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/3 "2021-12-08T04:47:04Z")

</div>

Hi there, is there any way to find a solution for this? How is the H7+ open source if we cannot get the schematic and board files?

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [December 8, 2021, 7:57am UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/4 "2021-12-08T07:57:53Z")

</div>

We literally don’t use the words open source on the H7 plus page. We only say the software is open source.

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [December 8, 2021, 7:58am UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/5 "2021-12-08T07:58:42Z")

</div>

Also, if you need the files there’s an orcad one somewhere. I can’t open it. The H7 plus was laid out by contractors. It’s not a design done entirely by us.

---

<div class="post-metadata">

**Author:** ![darrask](https://avatars.discourse-cdn.com/v4/letter/d/ec9cab/32.png) [@darrask](https://forums.openmv.io/u/darrask)\
**Post date:** [December 8, 2021, 8:21am UTC](https://forums.openmv.io/t/eagle-files-for-the-openmv-cam-h7-plus/2074/6 "2021-12-08T08:21:20Z")

</div>

I see. thanks for clarifying