# Can't connect Nano 33 BLE (not sense)

**URL:** <https://forums.openmv.io/t/cant-connect-nano-33-ble-not-sense/7460>\
**Category:** Arduino Boards\
**Created:** [August 31, 2022, 1:27pm UTC](https://forums.openmv.io/t/cant-connect-nano-33-ble-not-sense/7460 "2022-08-31T13:27:25Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![mrArtful](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@mrArtful](https://forums.openmv.io/u/mrArtful)\
**Post date:** [August 31, 2022, 1:27pm UTC](https://forums.openmv.io/t/cant-connect-nano-33-ble-not-sense/7460/1 "2022-08-31T13:27:26Z")

</div>

Hello,  
I followed instructions on Arduino website on how to connect nano 33 ble to openmv. After installing latest firmware (v4.3.1) OpenMV doesn’t see my board. Tells “No OpenMV Cams found”. OpenMV version 2.9.2  
If I manually choose Nano 33 ble board from a list, “No BOSSAC settings for the selected device” message comes out.

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [August 31, 2022, 1:44pm UTC](https://forums.openmv.io/t/cant-connect-nano-33-ble-not-sense/7460/2 "2022-08-31T13:44:13Z")

</div>

Bi, this is an issue related to installing the bootloader with the Arduino IDE to enable openmv on the Arduino Nano BLE. When done right the process works.

---

<div class="post-metadata">

**Author:** ![mrArtful](https://avatars.discourse-cdn.com/v4/letter/m/e495f1/32.png) [@mrArtful](https://forums.openmv.io/u/mrArtful)\
**Post date:** [August 31, 2022, 1:47pm UTC](https://forums.openmv.io/t/cant-connect-nano-33-ble-not-sense/7460/3 "2022-08-31T13:47:28Z")

</div>

Sorry, just did one more time, missed couple steps in arduino ide. It seems to work now
