# Cannot power up the OpenMV board

**URL:** <https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175>\
**Category:** OpenMV Boards\
**Created:** [January 6, 2017, 2:46am UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175 "2017-01-06T02:46:29Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![cagiva](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/cagiva/32/16_2.png) [@cagiva](https://forums.openmv.io/u/cagiva)\
**Post date:** [January 6, 2017, 2:46am UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/1 "2017-01-06T02:46:29Z")

</div>

Our OpenMV board arrived today from Robotshop. However, when I connect it to the laptop or to an external 5V power supply, none LED lights up and it doesn’t show listed under the /dev/ directory (ls /dev/tty.\*). Is it defective? On the back reads:

OpenMV Cam 2  
OV7725 - Rev 1  
2/9/2016

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [January 6, 2017, 3:14am UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/2 "2017-01-06T03:14:11Z")

</div>

Mmm, this could be. But, it shouldn’t be. Um, can use attach a wire between the BOOT0 and RST pin and then plug it back into your computer.

The DFU bootloader should appear as a device. If this is the case then you can recover it using the DFU util built-in to the IDE. You’ll just need to install a few command lines tools for this to work. Let me know if the device appears as a DFU bootloader in linux and I’ll tell you how to proceed. If you can’t find the device you can also just try blindly. You’ll need to install these things:

sudo apt-get install libusb-1.0 python-pip  
sudo pip install pyusb

---

<div class="post-metadata">

**Author:** ![cagiva](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/cagiva/32/16_2.png) [@cagiva](https://forums.openmv.io/u/cagiva)\
**Post date:** [January 6, 2017, 8:06am UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/3 "2017-01-06T08:06:14Z")

</div>

Your suggestion did it “attach a wire between the BOOT0 and RST pin and then plug it back into your computer”. After that I was able to upload the firmware and run the sample programs. Thanks, and good luck with the new KickStarter campaign!

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [January 6, 2017, 2:39pm UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/4 "2017-01-06T14:39:45Z")

</div>

Great!

We do actually test all cams with a firmware image and it’s weird that it somehow doesn’t work once you get it in your hands…

---

<div class="post-metadata">

**Author:** ![cagiva](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/cagiva/32/16_2.png) [@cagiva](https://forums.openmv.io/u/cagiva)\
**Post date:** [January 7, 2017, 8:45am UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/5 "2017-01-07T08:45:02Z")

</div>

Yes, that didn’t make sense to me either.

BTW, does the line below mean that the firmware installed was the latest OpenMV Version 2 in conjunction with MicroPython v1.8? Does your IDE alway install the latest release version?

**MicroPython v1.8-4345-g3a2670b on 2016-11-03; OPENMV2 with STM32F427**

> **[Release v2.0 · openmv/openmv](https://github.com/openmv/openmv/releases/tag/v2.0)**
>
> Firmware:
> 
> WiFi driver fixes.
> 
> Image processing:
> 
> Add HoG.
> Add lens correction function.
> Add clear image for quick testing.
> Fix template ROI.
> Switch to FAST-12.
> Misc fixes to image library.

> **[Release v1.8.3: Many small improvements and additions, with btree support in...](https://github.com/micropython/micropython/releases/tag/v1.8.3)**
>
> …port
> This release brings various improvements and additions to the core,
> extended modules and the ESP8266 port, as well as enhancements to the docs.
> There is now a "threshold" function in the gc m...

---

<div class="post-metadata">

**Author:** ![kwagyeman](https://yyz1.discourse-cdn.com/flex029/user_avatar/forums.openmv.io/kwagyeman/32/4_2.png) [@kwagyeman](https://forums.openmv.io/u/kwagyeman)\
**Post date:** [January 7, 2017, 3:50pm UTC](https://forums.openmv.io/t/cannot-power-up-the-openmv-board/175/6 "2017-01-07T15:50:14Z")

</div>

We install the latest version of our firmware with MP. Ibrahim will need to update our code base to the latest MP version. This usually breaks a lot of stuff each time he does this so it’s somewhat avoided if not necessary. For the M7 board we will pull in all MP changes again.

As for the documentation, we should have that updated by next week along with another firmware release. We’re working on getting the QRCode stuff our the door right now analog with a bunch of other changes.
