Search found 22 matches

by rocksetta
Wed Oct 28, 2020 11:58 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

kwagyeman wrote:
Wed Oct 28, 2020 6:15 pm
I just need to get the Mac IDE to compile and I can release. I’ll try to get this done next week.

There’s a lot on my plate however.
No rush, this works so it is the least of my worries.
by rocksetta
Wed Oct 28, 2020 6:03 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Awesome. New version fixes the autoboot ability. Thank you so much. Both my personal Portentas are now autobooting. I will see what that has done to my ability to use the Vision Shield. Any idea when this new version will be released? I want to make a video about micropython to add to my Portenta p...
by rocksetta
Wed Oct 21, 2020 11:55 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Awesome. New Release fixes the autoboot ability. Thank you so much. Both my personal Portentas are now autobooting. I will see what that has done to my ability to use the Vision Shield.
by rocksetta
Wed Oct 21, 2020 6:25 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

This is also really interesting. I got a brand new Portenta today. Installed v21 Portenta Bootloader using version 1.3.0 MBED. Ran it on OpenMV IDE and it did not install into the folder the .openmv_disk file which somehow helps the menu commands Tools --> Open OpenMV cam Drive folder --> Configure....
by rocksetta
Wed Oct 21, 2020 5:23 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Thanks so much for your help Nyamekye. I thought a video would help. Is it possible you have some software installed that we don't.

See video in the attachments.

This is a fresh install of OpenMV version 2.6.5
by rocksetta
Wed Oct 21, 2020 2:02 pm
Forum: Arduino Portenta H7
Topic: Use the PortentaVisionShield using the Arduino IDE
Replies: 7
Views: 137

Re: Use the PortentaVisionShield using the Arduino IDE

Hi, Arduino supports vision shield on IDE. It just takes time to provide full support on various platforms and we felt that the most interesting use of this board would be with openmv that has lots of libraries that can help you quickly do more than just capturing a picture. We already have a primi...
by rocksetta
Wed Oct 21, 2020 1:30 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Yeah, I saved a script on the camera and just had it plugged in via a USB C cable to a power only port and it was blinking the LED onboard. I programmed it to blink the red led versus the blue one. That is interesting, because I thought I did have that working a week ago (around the time my Vision ...
by rocksetta
Tue Oct 20, 2020 10:34 pm
Forum: Arduino Portenta H7
Topic: Use the PortentaVisionShield using the Arduino IDE
Replies: 7
Views: 137

Re: Use the PortentaVisionShield using the Arduino IDE

Um, it's not really our shield. You should email Arduino about this. We've partnered to support all functionality of it. My goal is to get quality drivers working in our firmware and support for features folks want and need. If you are looking for Arduino to offer more drivers in C for everything t...
by rocksetta
Tue Oct 20, 2020 10:05 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

I tested saving a script to the camera and it works as expected. Save the script to OpenMV Cam under Tools. Then reset the camera with the reset OpenMV Cam option under Tools. Yes, but your test has you still connected to the IDE, I want to know if fully away from the computer, only powered by a us...
by rocksetta
Tue Oct 20, 2020 10:02 pm
Forum: Arduino Portenta H7
Topic: Examples menu needs a Portenta Section
Replies: 4
Views: 70

Re: Examples menu needs a Portenta Section

kwagyeman wrote:
Mon Oct 19, 2020 10:48 pm
I’ve made a new ide release that I’m about to do smart. It will automatically change rgb565 to grayscale when the HM1B camera or any other grayscale only camera is attached.
Cool idea.
by rocksetta
Mon Oct 19, 2020 11:08 pm
Forum: Arduino Portenta H7
Topic: Tricks to separate the Portenta and the visionCam
Replies: 4
Views: 82

Re: Tricks to separate the Portenta and the visionCam

Was really surprised today to realize that the high density connectors can be connected either way round. That is not really an OpenMV issue but you should be aware of it. Have your tried connecting your board the opposite way. As far as I can tell it fits quite nicely. Very surprised as this could ...
by rocksetta
Mon Oct 19, 2020 11:04 pm
Forum: Arduino Portenta H7
Topic: Use the PortentaVisionShield using the Arduino IDE
Replies: 7
Views: 137

Re: Use the PortentaVisionShield using the Arduino IDE

However, the serial terminal they have is not going to cut it. ... There's other things you have to add like memory allocation support, SDRAM control, DMA support, etc. You basically end up making OpenMV again. Good points, Kwagyeman, but all the more reason for Arduino and openMV to make basic wor...
by rocksetta
Mon Oct 19, 2020 10:10 pm
Forum: Arduino Portenta H7
Topic: Examples menu needs a Portenta Section
Replies: 4
Views: 70

Re: Examples menu needs a Portenta Section

That would be great Nyamekye. Unfortunately I have done something to my Camera, so I will have to wait for my other camera to arrive for me to problem solve my first cameras issues. Not a big deal, breaking new tech is one of my skills.
by rocksetta
Mon Oct 19, 2020 10:04 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Nyamekye,


Quick question, since my installation may have some issues, does your portenta with camera work when disconnected from the IDE. Say just powered with a usb battery? Mine doesn't, just curious if yours does.
by rocksetta
Mon Oct 19, 2020 1:37 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Re: Micropython autoboot boot.py

Do you have a boot.py script that we could try. Just running main.py without your IDE does not work for me. I found this on an adafruit site. Is tht all that is needed in a boot.py file? # boot.py -- run on boot-up # can run arbitrary Python, but best to keep it minimal import pyb #pyb.main('main.py...
by rocksetta
Mon Oct 19, 2020 12:45 pm
Forum: Arduino Portenta H7
Topic: Micropython autoboot boot.py
Replies: 18
Views: 212

Micropython autoboot boot.py

@kwagyeman Can you make a sub thread called Portenta-micropython. A fair number of people have micropython questions. My first questions would be, how do we get a boot.py file onto our board. Everything works fine connected to the IDE, but when I choose to dave the program to my drive, it does not w...
by rocksetta
Fri Oct 16, 2020 11:07 pm
Forum: Arduino Portenta H7
Topic: Are any of the Portenta Visible PINS used
Replies: 3
Views: 78

Are any of the Portenta Visible PINS used

I can't seem to find any information about which of the 160 PortentaH7 pins are being used by the PortentaVisionShield. If I would like to connect the Portenta with some actuators it would be good to know which PINS are in use and which are available. This Github configuration file seems to have som...
by rocksetta
Fri Oct 16, 2020 5:43 pm
Forum: Arduino Portenta H7
Topic: Tricks to separate the Portenta and the visionCam
Replies: 4
Views: 82

Re: Tricks to separate the Portenta and the visionCam

So it does just kind of pop apart. Putting it back together is interesting since it is hard to find a place to squeeze the boards together. I found just at both ends there seems to be a spot where you can squeeze with a bit of force. With this shield it is easy to tell which way round to line them u...
by rocksetta
Fri Oct 16, 2020 4:34 pm
Forum: Arduino Portenta H7
Topic: Use the PortentaVisionShield using the Arduino IDE
Replies: 7
Views: 137

Use the PortentaVisionShield using the Arduino IDE

I realize this topic is a bit contentious, because Arduino is going to say that it is OpenMV's responsibility and OpenMV is going to say that it is Arduino's responsibility, but at some point a customer is going to purchase a PortentaVisionShield not read all the information about it and be really a...
by rocksetta
Fri Oct 16, 2020 3:56 pm
Forum: Arduino Portenta H7
Topic: Trouble Shooting. What if the VisionCam isn't working
Replies: 1
Views: 38

Trouble Shooting. What if the VisionCam isn't working

My PortentaVisionCam was working fine, and now doesn't. What are my steps to take. Unlike most microcontroller issues, I would assume I have messed up my wires. What would your typical steps be for trouble shooting. Presently I have 1. The Portenta breaths green on button double press (DFU). I can i...
by rocksetta
Fri Oct 16, 2020 3:43 pm
Forum: Arduino Portenta H7
Topic: Examples menu needs a Portenta Section
Replies: 4
Views: 70

Examples menu needs a Portenta Section

Very frustrating trying the examples and having multiple examples that do not work directly using the PortentaVisionShield. Not sure what is specific to the shield and what is for other OpenMV products. How hard would it be to make a Portenta menu in the examples that has defaults that work without ...
by rocksetta
Fri Oct 16, 2020 3:11 pm
Forum: Arduino Portenta H7
Topic: Tricks to separate the Portenta and the visionCam
Replies: 4
Views: 82

Tricks to separate the Portenta and the visionCam

Any suggestions for easy ways to separate the 2 boards. Typically I would just rock one board side to side until one side comes up. Anyone got any suggestions? Just pull straight apart?

Go to advanced search