Search found 19 matches

by jubi5312
Tue Jan 14, 2020 3:35 pm
Forum: Technical Discussion
Topic: How can I access LEPTON API using OpenMV IDE?
Replies: 7
Views: 1681

Re: How can I access LEPTON API using OpenMV IDE?

Thank you for the inputs by showing the example. I have understood it better. I wanted to know how I could read the values in OpenMV IDE of the below code u wrote? import sensor, struct data = sensor.ioctl(sensor.IOCTL_LEPTON_GET_ATTRIBUTE, 0x4ED0, 4) radSpotmeterValue, radSpotmeterMaxValue, radSpot...
by jubi5312
Mon Jan 13, 2020 7:51 pm
Forum: Technical Discussion
Topic: How can I access LEPTON API using OpenMV IDE?
Replies: 7
Views: 1681

Re: How can I access LEPTON API using OpenMV IDE?

Hi, I am sorry to pose the same questions again. I am new to programming and is having a hard time to figure out the example you showed. Is it possible for you to show one more similar method to access LEPTON SDK in OpenMV IDE. I am trying to use RAD T-Linear Enable State (4.8.9 Pg 149) from the Lep...
by jubi5312
Fri Jan 03, 2020 7:44 pm
Forum: Technical Discussion
Topic: Temperature value of each pixel captured by LEPTON
Replies: 39
Views: 4066

Re: Temperature value of each pixel captured by LEPTON

Hi,

The saved image does not give temperature for each pixel. Is there any way to get temperature for each pixel in the frame?

Thanking you,
Jubin
by jubi5312
Fri Jan 03, 2020 7:39 pm
Forum: Technical Discussion
Topic: Extracting any pixel temperature data from the frame using Lepton
Replies: 1
Views: 613

Extracting any pixel temperature data from the frame using Lepton

Hi, The present code getobjecttemp on OpenMV IDE detect objects uses blob detection and displays the temperature on the screen. I was able to adjust the threshold and target temperature to get the whole frame. I wanted to read temperature value for each pixel in the frame. How can I extract temperat...
by jubi5312
Fri Jan 03, 2020 2:04 pm
Forum: Technical Discussion
Topic: Temperature value of each pixel captured by LEPTON
Replies: 39
Views: 4066

Re: Temperature value of each pixel captured by LEPTON

Hi, I wanted to add the spot-meter feature and read the temperature value of a precise spot(roi) under measurement. I accessed the FLIR LEPTON IDD documentation and it has an example SDK interface code for obtaining spot-meter value, I have attached the snapshot of this). Could you kindly guide me o...
by jubi5312
Mon Dec 30, 2019 4:46 pm
Forum: Technical Discussion
Topic: Temperature value of each pixel captured by LEPTON
Replies: 39
Views: 4066

Temperature value of each pixel captured by LEPTON

Hi,

I use Lepton 3.5 with OpenMV board. I wanted to get the temperature values of each pixel of the frame captured(160*120). Are there any available codes for this. Could the pixel data be accessed in excel?

~Jubin
by jubi5312
Thu Dec 26, 2019 1:38 pm
Forum: Technical Discussion
Topic: ATWINC1500-MR210PB firmware
Replies: 6
Views: 1190

Re: ATWINC1500-MR210PB firmware

Thank you, it works.
by jubi5312
Mon Dec 23, 2019 6:12 pm
Forum: Technical Discussion
Topic: ATWINC1500-MR210PB firmware
Replies: 6
Views: 1190

Re: ATWINC1500-MR210PB firmware

Hello,

Sorry about the repeated posts. I am using OpenMV IDE 2.2.0 version. Is there an updated version? Where can I find it?
by jubi5312
Mon Dec 23, 2019 4:49 pm
Forum: Technical Discussion
Topic: ATWINC1500-MR210PB firmware
Replies: 6
Views: 1190

Re: ATWINC1500-MR210PB firmware

Hi,

I can only find winc_19_5_2.bin in the specified folder. This file is not supported by the WiFi-chip.
by jubi5312
Fri Dec 20, 2019 5:49 pm
Forum: Technical Discussion
Topic: ATWINC1500-MR210PB firmware
Replies: 6
Views: 1190

ATWINC1500-MR210PB firmware

Hello, I am trying to connect the WiFi module with Openmv cam to the net. When running this, it says to update the firmware, as per the notes in the code, the firmware available in the OpenMV IDE is winc_19_5_2.bin and the required firmware for ATWINC1500-MR210PB is winc_19_6_1.bin. Could you kindly...
by jubi5312
Fri Dec 06, 2019 4:29 pm
Forum: Technical Discussion
Topic: Led blinking white
Replies: 12
Views: 1769

Re: Led blinking white

Hi,

The lepton module is now working properly. I inserted it with more force as you suggested. I am connecting the WiFi module to OpenMV using a breadboard with Jumper cables, once done I shall post the pictures. I think previously, I did not connect it with matching signals.

Jubin
by jubi5312
Fri Dec 06, 2019 1:56 pm
Forum: Technical Discussion
Topic: Led blinking white
Replies: 12
Views: 1769

Re: Led blinking white

Hello, I have tried running the boot loader and erased the internal file system and ran the self-test, but the board keeps blinking white. At first, the lepton module worked fine. I also tried running the occupancy detection and it worked. The issues started happening after I tried connecting the Wi...
by jubi5312
Tue Nov 26, 2019 8:35 am
Forum: Technical Discussion
Topic: Led blinking white
Replies: 12
Views: 1769

Re: Led blinking white

Hi,

The board does not work now. I tried running the bootloader also. It says the above mentioned error. Is the the board wifi compatible? The board was working fine with lepton module.. now none of it works.

~Jubin
by jubi5312
Wed Nov 20, 2019 1:07 pm
Forum: Technical Discussion
Topic: Led blinking white
Replies: 12
Views: 1769

Re: Led blinking white

I have attached the pictures. I had soldered them from the top.
by jubi5312
Tue Nov 19, 2019 5:22 pm
Forum: Technical Discussion
Topic: Led blinking white
Replies: 12
Views: 1769

Led blinking white

Hello, I am encountering issues on connectivity with the OpenMV board that I recently bought for usage with Lepton. Along with the board, I had bought WiFi and pan-tilt shields. The board initially worked fine with the Lepton module. In order to connect the WiFi-shield, I had soldered stacking heade...
by jubi5312
Thu Oct 31, 2019 7:23 pm
Forum: Technical Discussion
Topic: How can I access LEPTON API using OpenMV IDE?
Replies: 7
Views: 1681

Re: How can I access LEPTON API using OpenMV IDE?

Thank you for the prompt reply. I will look into the documentations and try accessing the LEPTON API as you suggested. I am trying to add a spot feature to the lepton camera interface! This would enable us to read the spot temperature. As of now with the default settings the camera is not reading ac...
by jubi5312
Wed Oct 30, 2019 8:17 pm
Forum: Technical Discussion
Topic: How can I access LEPTON API using OpenMV IDE?
Replies: 7
Views: 1681

How can I access LEPTON API using OpenMV IDE?

Hello,

I got my new kit of OpenMV with Lepton 3.5 and accessories. I ran the example codes and it works fine. I needed to calibrate the thermal camera to obtain accurate temperature data i.e change it's measurement parameters; how could I access the Lepton API through OpenMV IDE.

Thanks,
~Jubin
by jubi5312
Fri Oct 11, 2019 12:16 pm
Forum: Technical Discussion
Topic: Lepton functionality with OpenMV
Replies: 3
Views: 827

Re: Lepton functionality with OpenMV

Thank you.
by jubi5312
Mon Oct 07, 2019 8:49 pm
Forum: Technical Discussion
Topic: Lepton functionality with OpenMV
Replies: 3
Views: 827

Lepton functionality with OpenMV

Hello, I am working on an Infrared camera project using FLIR lepton and I am hoping to start with OpenMV FLIR kits. I had few queries to clear before the purchase, Is FLIR lepton 3.5, 160x120 compatible with OpenMV? I wanted to know if the pan tilt shield is compatible with PhantomX Robot Turret Kit...

Go to advanced search