OpenMV Cam2 white blinkining LED after firmware update

Discussion related to "under the hood" OpenMV topics.
indefix123
Posts: 6
Joined: Wed Apr 17, 2019 7:19 am

OpenMV Cam2 white blinkining LED after firmware update

Postby indefix123 » Wed Apr 17, 2019 7:26 am

Hi I have tryed to use the OpenMV cam M4 with the OpenMV IDE and it asked me to update the firmware. After doing it I was not able to use it and there is always the white blinking LED. I tryed the update using also the OpenMV's DFU bootloader with the jumper at the Boot and RST pins but again it did not work. Is there any other solution?
indefix123
Posts: 6
Joined: Wed Apr 17, 2019 7:19 am

Re: OpenMV Cam2 white blinkining LED after firmware update

Postby indefix123 » Wed Apr 17, 2019 9:40 am

Found a solution in viewtopic.php?t=217 the firmware zip files contains the appropriate bootloader.
User avatar
kwagyeman
Posts: 2898
Joined: Sun May 24, 2015 2:10 pm

Re: OpenMV Cam2 white blinkining LED after firmware update

Postby kwagyeman » Wed Apr 17, 2019 10:53 am

Great!
Nyamekye,

Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests