Openmv in UVC mode

General discussion about topics related to OpenMV.
satya
Posts: 2
Joined: Mon Nov 19, 2018 6:16 am

Openmv in UVC mode

Postby satya » Sat Nov 24, 2018 12:06 am

Hi i am using openmv camera in uvc mode in linux it is detected as /dev/video1 working well in all software tools like vlc and guvcview
but in Windows in uvc mode(flashed uvc.bin) i am not able to get the video in openmv and vlc.

is openmv uvc firmware is not supported in windows??
can you please provide breif details?
User avatar
iabdalkader
Posts: 933
Joined: Sun May 24, 2015 3:53 pm

Re: Openmv in UVC mode

Postby iabdalkader » Sat Nov 24, 2018 9:49 am

satya wrote:
Sat Nov 24, 2018 12:06 am
Hi i am using openmv camera in uvc mode in linux it is detected as /dev/video1 working well in all software tools like vlc and guvcview
but in Windows in uvc mode(flashed uvc.bin) i am not able to get the video in openmv and vlc.

is openmv uvc firmware is not supported in windows??
can you please provide breif details?
Hi, which Windows ? can you try a different streaming program ?
satya
Posts: 2
Joined: Mon Nov 19, 2018 6:16 am

Re: Openmv in UVC mode

Postby satya » Mon Nov 26, 2018 2:08 am

in windows 10

i was downlaod the code from git
and compiled and flashed the bootloader.bin in Address 0x800000 and firmware.bin in Address 0x8020000
if i flash the bootloader and firmware then video is coming in linux os and windows os in openmv ide(working good)

but,
if i flash the botloader and uvc
then in linux, video is detecting as /dev/video1 and video is coming in vlc and all other tools and working well
but in windows, open mv is detected as has openmv cam usb com port(com5) but i am not able to connect with openmv ide tool or any other video streaming tools


my goal is to get the video streaming in windows 10 in uvc mode with any streaming tools(openmve ide, vlc. mplayer).


how can i achieve ???
User avatar
kwagyeman
Posts: 3258
Joined: Sun May 24, 2015 2:10 pm

Re: Openmv in UVC mode

Postby kwagyeman » Mon Nov 26, 2018 11:38 am

Hi, please choose to talk to us over email or the forums but not both.
Nyamekye,

Return to “General Topics”

Who is online

Users browsing this forum: No registered users and 2 guests