New firmware release

Discussion related to "under the hood" OpenMV topics.
sexton
Posts: 21
Joined: Sat Jun 09, 2018 1:08 pm

New firmware release

Postby sexton » Sat Jun 30, 2018 12:28 pm

I know that you are working on a new firmware release. Any idea when it will be out?
User avatar
iabdalkader
Posts: 596
Joined: Sun May 24, 2015 3:53 pm

Re: New firmware release

Postby iabdalkader » Sat Jun 30, 2018 12:45 pm

The firmware is out already, the IDE update will follow in a few days. if you don't want to wait for the IDE update you can download the images from github and upload them to the camera:

https://github.com/openmv/openmv/releases/tag/3.0
sexton
Posts: 21
Joined: Sat Jun 09, 2018 1:08 pm

Re: New firmware release

Postby sexton » Sat Jun 30, 2018 3:34 pm

Thanks.

One suggestion. You should update the readme to indicate which OPENMV# maps to which camera. I know mv3 is m7 and I assume mv4 is for h7 but as you add cameras it would be useful to have a map.
ryann2k1
Posts: 2
Joined: Wed Jul 04, 2018 11:48 pm

Re: New firmware release

Postby ryann2k1 » Wed Jul 04, 2018 11:54 pm

Just bought my MV Cam and once trying to connect, it pops out a message to register the camera and the RGB led flashing green for few 1-2 seconds. Does this related to the firmware issue?

thanks
User avatar
kwagyeman
Posts: 2407
Joined: Sun May 24, 2015 2:10 pm

Re: New firmware release

Postby kwagyeman » Thu Jul 05, 2018 12:15 am

No, the green LED on plugin is the bootloader running.

If you're getting the registration pop-up that means that you bought a Chinese clone.
Nyamekye,
ryann2k1
Posts: 2
Joined: Wed Jul 04, 2018 11:48 pm

Re: New firmware release

Postby ryann2k1 » Thu Jul 05, 2018 1:05 am

omg... :(
thanks for letting me know... should complain to the seller
and if that's the case, can i purchase the key (register the product) so I can use the cam?
User avatar
kwagyeman
Posts: 2407
Joined: Sun May 24, 2015 2:10 pm

Re: New firmware release

Postby kwagyeman » Thu Jul 05, 2018 1:39 am

PM me and I'll give you a free key.
Nyamekye,

Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 237 guests