Page 1 of 1

This method is unavailable on your OpenMV Cam version.

Posted: Sun Jun 24, 2018 1:07 pm
by jiapei100
Testing gaussian with the titled ERROR message:
OSError: This method is unavailable on your OpenMV Cam version.

Serial Terminal also gives me the following ERROR message:
>>>
>>>
raw REPL; CTRL-B to exit
>OK
Traceback (most recent call last):
File "<stdin>", line 17, in <module>
OSError: This method is unavailable on your OpenMV Cam version.
>
MicroPython v1.9.3-4922-ge0f81c867 on 2018-04-23; OPENMV2 with STM32F427
Type "help()" for more information.
>>>
I can tell from the back of OpenMV board:

Code: Select all

OpenMV Cam 2
OV7725 - Rev 1
2/9/2016
So, questions:
  • Which version is the NEWEST with all functions enabled?
  • Is it possible to just flash my current OpenMV Cam and enable all functions? I mean: is it ONLY a firmware flash issue or must it be a hardware issue?
Thank you very much.

Have a nice day.
Pei

Re: This method is unavailable on your OpenMV Cam version.

Posted: Sun Jun 24, 2018 5:41 pm
by iabdalkader
* Which version is the NEWEST with all functions enabled?
The camera you have is the original OpenMV2-M4 (the kickstarter camera). I think it's at least 5 years old now (the date is the production run/rev date). The newest camera with everything enabled is the OpenMV4-H7 which is Not released yet and will be released soon. The current camera is OpenMV3-F7 (it also supports everything, except it has less memory/processing than H7) you can buy it from our store or from distributors (SFE, RobotShop etc...).
* Is it possible to just flash my current OpenMV Cam and enable all functions? I mean: is it ONLY a firmware flash issue or must it be a hardware issue?
No, those functions are disabled for the M4 because we run out of flash, ram or it's just too slow to support them.

That said, actually gaussian should work on OMV2 I'll re-enable it now.

Re: This method is unavailable on your OpenMV Cam version.

Posted: Mon Jun 25, 2018 4:38 am
by jiapei100
Great.. When will be your release date of OpenMV4-H7 ? I'd love to get one... Or, is there an early-bird price ?

What's more, from the name, OpenMV3-F7 should come with a STM32F7? While OpenMV4-H7 comes with a STM32H7?


Cheers
Pei

Re: This method is unavailable on your OpenMV Cam version.

Posted: Mon Jun 25, 2018 10:19 am
by iabdalkader
jiapei100 wrote:
Mon Jun 25, 2018 4:38 am
Great.. When will be your release date of OpenMV4-H7 ? I'd love to get one... Or, is there an early-bird price ?
We're going to kickstart it soon.
jiapei100 wrote:
Mon Jun 25, 2018 4:38 am
What's more, from the name, OpenMV3-F7 should come with a STM32F7? While OpenMV4-H7 comes with a STM32H7?
That's true.

https://www.youtube.com/watch?v=1Bfa0TnSIFc

Re: This method is unavailable on your OpenMV Cam version.

Posted: Tue Jun 26, 2018 1:43 am
by kwagyeman
I'll be doing the KickStarter for the H7 in September. We have a final firmware release to get done next for v3.0.0 and then I will focus on website updates and the H7 media campaign.

Re: This method is unavailable on your OpenMV Cam version.

Posted: Thu Jul 05, 2018 4:37 pm
by jiapei100
kwagyeman wrote:
Tue Jun 26, 2018 1:43 am
I'll be doing the KickStarter for the H7 in September. We have a final firmware release to get done next for v3.0.0 and then I will focus on website updates and the H7 media campaign.
Looking forward to it... Can I have the "early bird" price? ^_^

Re: This method is unavailable on your OpenMV Cam version.

Posted: Thu Jul 05, 2018 7:17 pm
by kwagyeman
There will be early bird reward tiers sold at cost.