Hello there,
I am working on an RCJ Soccer Open robot and I bought an OpenMV M7 for detecting the orange ball.
I have made a simple code to write blob.cx() over UART to Teensy 3.2’s Serial3 port
When I upload the program to OpenMV it works just fine and I get the wanted values on teensy’s port, however when I turn off the cam and teensy and turn them on again OpenMV’s program wouldn’t start I
am powering OpenMV trough 5v switching regulator.The OpenMV’s code starts working when I plug in the micro-usb to OpenMV and start te code by the button on the screen.
What can cause this?
Thanks, Andrija.