Hi,
Is it possible to power the OpenMV by supplying regulated 3.3v directly to Vcc ?
Would the BD33IA regulator be ok with 3.3 volts supplied back up its output VO pin ?
The reason I ask is that I have a device ( a robot ) powered by 8.4v from 2 Li-ion cells. The robot is controlled by a 3.3v Arduino and I already have a 3.3 regulator supplying this and all the other sensors. The Open MV is the only one that can’t be powered from 3.3v. It requires 3.6 - 5v.
So would it be very bad for me to tap into Vcc somewhere and feed it 3.3 directly?
Thanks,
Dave