OpenMV setup in Linux environment

Discussion related to "under the hood" OpenMV topics.
sumedh2670
Posts: 5
Joined: Tue Oct 01, 2019 1:27 am

OpenMV setup in Linux environment

Postby sumedh2670 » Tue Oct 01, 2019 2:11 am

Hi,
I am using OpenMV Cam H7 and I am trying to setup the IDE in linux environment. I am using windows 10 and I am trying to set up the environment in ubuntu via VMware . I am following the instruction page https://github.com/openmv/openmv/wiki . However, as mentioned in the section "After installing QtCreator open it up and:" , there are list of 10 points enlisted. In point 8 , it is written that:
Under make arguments add TARGET=OPENMV3 to build for the OpenMV Cam M7 (or TARGET=OPENMV2 to build for the OpenMV Cam M4). If you don't add this the firmware is built for the OpenMV Cam M4 by default.
. It is not specified what argument to give for OpenMV Cam H7. I am confused what argument to give for a OpenMV Cam H7 Build. Please Help!
User avatar
kwagyeman
Posts: 3829
Joined: Sun May 24, 2015 2:10 pm

Re: OpenMV setup in Linux environment

Postby kwagyeman » Tue Oct 01, 2019 2:30 am

TARGET=OPENMV4

For the new SDRAM camera it's:

TARGET=OPENMV4R
Nyamekye,
sumedh2670
Posts: 5
Joined: Tue Oct 01, 2019 1:27 am

Re: OpenMV setup in Linux environment

Postby sumedh2670 » Tue Oct 01, 2019 4:12 am

Okay ,Thanks!

Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 6 guests