How to implement POST and GET

OpenMV related project discussion.
Ablon
Posts: 4
Joined: Wed Sep 13, 2017 9:28 am

How to implement POST and GET

Postby Ablon » Tue Feb 27, 2018 10:13 pm

Dear All,
I would like to request for a sample code/s based from original sample codes. While printing the data extracted to the Serial Monitor, it should also send the data via WIFI shield to a local Web Server, thank a lot for all the help.

# QRCode Example
#
# This example shows the power of the OpenMV Cam to detect QR Codes
# using lens correction (see the qrcodes_with_lens_corr.py script for higher performance).

import sensor, image, time

sensor.reset()
sensor.set_pixformat(sensor.RGB565)
sensor.set_framesize(sensor.QVGA)
sensor.skip_frames(time = 2000)
sensor.set_auto_gain(False) # must turn this off to prevent image washout...
clock = time.clock()

while(True):
clock.tick()
img = sensor.snapshot()
img.lens_corr(1.8) # strength of 1.8 is good for the 2.8mm lens.
for code in img.find_qrcodes():
img.draw_rectangle(code.rect(), color = (255, 0, 0))
print(code)
print(clock.fps())
### Implementation of POST and GET below#######
User avatar
iabdalkader
Posts: 550
Joined: Sun May 24, 2015 3:53 pm

Re: How to implement POST and GET

Postby iabdalkader » Wed Feb 28, 2018 8:43 am

Just like you would in Python:

Code: Select all

sock.send("GET / HTTP/1.0\r\n\r\n")

Return to “Project Discussion”

Who is online

Users browsing this forum: No registered users and 2 guests