DFU programmation with openmvide

General discussion about topics related to OpenMV.
User avatar
chrisPyres66
Posts: 138
Joined: Mon Jul 16, 2018 9:22 am
Location: France

DFU programmation with openmvide

Postby chrisPyres66 » Wed Sep 04, 2019 8:08 am

Dear All,

I tried to program the cam H7 in dfu mode with openmvide V2.2 without success, and I could do it with stm32cubeprogrammer V2.1.0 in dfu mode.
Do you know why it does not work anymore with openmvide ?

I join you an image with stm32cubeprogrammer.

Thanks,
Attachments
dfuprogrammation_with_stm32cubeprogrammer.JPG
User avatar
kwagyeman
Posts: 3727
Joined: Sun May 24, 2015 2:10 pm

Re: DFU programmation with openmvide

Postby kwagyeman » Wed Sep 04, 2019 12:01 pm

We use ST's DFU tool in windows. What's the error exactly?
Nyamekye,
User avatar
chrisPyres66
Posts: 138
Joined: Mon Jul 16, 2018 9:22 am
Location: France

Re: DFU programmation with openmvide

Postby chrisPyres66 » Thu Sep 05, 2019 2:45 am

The programmation window appears and does nothing more than 5min.
I just installed the last stm32cubeprogrammer V2.1.0 in place of V1.1.0, i dont know if the driver has changed ?

I tried with UART3 boot mode and stm32cubeprogrammer but without success.
Have you already done it with uart boot mode ?

Thanks,
User avatar
kwagyeman
Posts: 3727
Joined: Sun May 24, 2015 2:10 pm

Re: DFU programmation with openmvide

Postby kwagyeman » Thu Sep 05, 2019 10:53 am

No, I always bootload using the USB port. I use the ST DFU tool.
Nyamekye,
User avatar
chrisPyres66
Posts: 138
Joined: Mon Jul 16, 2018 9:22 am
Location: France

Re: DFU programmation with openmvide

Postby chrisPyres66 » Wed Oct 16, 2019 4:54 am

It works now with the last stm32cubeprogrammer V2.2 at 115200bauds.

Return to “General Topics”

Who is online

Users browsing this forum: MSN [Bot] and 3 guests